It’s finally here, the Sigelei 100 Watt Box Mod. I have been eyeing this one for a while and as I mentioned a couple of weeks ago, I received one from Element Vape today. The price is perfect coming in at about $1 a watt too!
Let’s get right into it!
In the box, you have a couple of information cards, a pretty nice user’s guide, extra screws and a small screw driver, and the device itself. It doesn’t come with Sigelei wrapped batteries like you might have seen in some photos online.
The side of the mod has a nice display, up and down buttons and a large fire button. The button is quite nice compared to equally priced devices. The bottom of the unit has a ton of venting holes. The top house a 510 connector with reverse threaded adjustable pin.
The rear cover has magnets so you don’t have to use screws, but it also has screw holes if you prefer using screws and they come with it too. I am going to go without the screws personally. The magnets feel quite strong. The battery compartment has slots for 2 18650 batteries.
The display is spot on! It provides all the information you need in typical SX style fashion. This setup in the photo is how I am running my Lemo with 50/50 juice right now.
Here’s the Sigelei 100W with the Lemo (left) and the CLT2 RDA (right). These are my 2 favorite right now and they both perform quite nicely on the Sigelei 100 watt box.
For those of you that are using the iPV2, here are some comparison shots.
If you’d like to grab one for $99.99, head over to Element Vape!
Segelei 100W Box Mod Features:
- Chip: SX330 V3
- Optimal voltage range 3.0v-8.5
- Battery: Dual 18650
- Output Power: 7 Watts – 100 Watts
- Output Voltage: 1.0 Volts – 7.0 Volts
- Output Current: 30.0 A
- Input Voltage: 3.0 Volts – 9.0 Volts
- Input Current: 1.3 A – 20.0 A
- Atomizer Resistance: ~0.1Ω-2.0Ω
- Screen On Current: 25 mA
- Quiescent Current: 1 mA
- Power Down Current: 350 uA
- Efficiency: 93%
- Screen size: 0.96″ OLED
- Fire Method: Regular Button
- Adjust Power Method: Up and Down Button
- Dimensions: 96x52x33mm